跳转到主内容

型号 A1136 / 30, 60, 或 80 GB 硬盘 / 黑色或白色塑料面板

797 个问题 查看全部

I just replaced the battery, but now the back is loose.

I was replacing the battery on a 30gb ipod video, and it seemed to go well, except that the back is not completely holding in one corner. I assume I over flexed that part when separating the front and back. Any suggestions on how to improve the fit?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

gatewaynomad check the back and see if you can straighten out the clips that hold it onto the frame. If it is bend to far, spend the couple of $$ and replace it with a substitute. They are available at place like Amazon or ebay. If you don't it will pop open anytime it has a minor drop etc. this could cause larger damage to either the ribbon cables, battery or even the hard drive.

这个答案有帮助吗?

得分 3

1条评论:

Good advice. I am under a time constraint, but I might see if they will bring it back in, if I order a new back plate.

完成的

添加一条评论

添加你的答案

gatewaynomad 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 97