跳转到主内容

2.3L 4cyl or 3.0L V6, 6th Generation

426 个问题 查看全部

Where is the ignition coil?

Hello,

I think I might have the case of misfiring for my Honda Accord 4 cyclinders LX. My plan is to change out the ignition coil; yet I'm unsure of its position.

If any of you guru could help me in pinpointing out where it is, that would be great.

Sincerely.

Update (05/26/2017)

1999 Honda Accord LX 4 cyclinders.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
2条评论

I have a Honda Accord,a 1999 LX 2.3 litre Canadian bought.On real damp days it won't start.The plugs and wires were reinstalled 100km ago.Is it time for a change or is it my coil.

She's fine if you give her an hour and let the water evaporate and then will drive fine again until the next demo day.

完成的

I believe it is integrated with the distributor

完成的

添加一条评论

3个答案

已选择的解决方案

your coil, pn 30500-PAA-A01, is located inside the distributor, under the cap.

Block Image

这个答案有帮助吗?

得分 4
添加一条评论

Before going to the expense of replacing the coil it may be a good idea to get the codes read and find out for sure what the problem is .A misfire is not usually cause by a coil unless you have individual coils . This is an excellent video for diagnosing misfires in a honda

https://www.youtube.com/watch?v=m2fubKkv...

Hope this helps

这个答案有帮助吗?

得分 3

1条评论:

I agree with Jim, do not replace coil prior to other checks for misfire, Good diagnosing video link above in his answer.

完成的

添加一条评论

I have a 99 Honda accord lx and it will run fine for about half hour and stall out and won't start back up for about a half hour

这个答案有帮助吗?

得分 0

3条评论:

check the main relay and the fuel pump. one of them is most likely getting to hot, probably from a high internal resistance. once it has a chance to cool down it will work for a while until the heat builds up again.

完成的

The main relay controls the fuel pump, it is a normal wear and tear item but it can be resoldered to last another 10 years, just resolder the larger of the solder pads for the relays themselves, there are 2 of them, works every time IF THIS IS YOUR PROBLEM. By cooling down the distributor on the aluminum part of the body with a water hose may lessen the 30 minute cool down period to see if that is it or your CKP sensor or CMP sensor may also be overheating can be cooled down to troubleshoot. THis goes for any item that can be cooled down but the items listed are suspect.

完成的

My main relay switch that I purchased online was very cheap. All I did was plug it in underneath the steering column, and my car stopped dying on me. It took a long time to figure out the problem, in the process I killed my car battery.

完成的

添加一条评论

添加你的答案

Hien Nguyen 将永远感激不已
浏览统计数据:

过去 24 小时: 4

过去 7 天: 29

过去 30 天: 145

总计 12,642