跳转到主内容

2014年9月19日发布的iphone 6 Plus有着比iphone 6大的5.5英寸屏幕。

1525 个问题 查看全部

sometimes restarts after touch ic.

hey people, i did an meson ic repair, but the phone restarts sometimes. also the visual disapears sometimes, when putting the lightning cable in for example. and sometimes when i start the phone there is no backlight and visual. and sometimes its bootlooping. what could this be? do i have to search around the dock connector? or is this something where the backlight filtes are?

hope somebody can help me.

:)

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

* its not bootlooping anymore. after the first meson job i started the phone and touch worked. then suddenly te phone restarts and no touch. after the the second meson touch was back, but the boot problem is still there. the was not too much heat on the board.

完成的

添加一条评论

1个答案

已选择的解决方案

My suspicion would be too much heat, even if you don't think it to be the case. The edge of the CPU and you also have a row of passives that affect the camera, backlight etc directly opposite Meson. You may also have shorted some pins underneath Meson.

At this point you could try pulling Meson again, inspect the M1 pad (for your touch issues) and try booting the phone without it. If it still bootloops, then your problem is elsewhere.

这个答案有帮助吗?

得分 1

1条评论:

thans for your answer! i will try, but touch works perfectly so meson should be fine right?

完成的

添加一条评论

添加你的答案

thieske 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 810