Back camera not working, then front camera not working: Screen replace

Question

iPhone 6

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题查看全部

Eddie Geddy @eddiegod

声誉积分: 13

2

1

发帖于: 2017年5月6日

更多选项

Back camera not working, then front camera not working: Screen replace

Hi,

Before I start i would like to add that this is a different problem and have not been described from the threads ive read.

After my screen replacement on iPhone 6 I noticed that the back camera did not work, (it said it was too hot) I opened it and the back camera cable was not fully attached, I fixed it and the back camera started working, then the front camera did not work, what could have occured this?

Everything worked at first, and the front camera did work during the time the back camera was not working

Please help

Thanks in advance!

/Eddie

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

由 Eddie Geddy 完成的 2017年5月6日

添加一条评论

1个答案

已选择的解决方案

Minho @refectio

声誉积分: 221.4千

15

289

807

发帖于: 2017年5月6日

更多选项

I would go back and double check (see step 15) the connector for the front camera. It may have become partially dislodged when you fixed the back camera.

这个答案有帮助吗？

是否

得分 1

3条评论:

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard.

由 Eddie Geddy 完成的 2017年5月6日

Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine).

由 Minho 完成的 2017年5月6日

Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke.

由 Eddie Geddy 完成的 2017年5月6日

添加一条评论

Yes, i tried it but it did not work, can it have anything to do with the battery giving to much volt, please dont tell me I will need to sold/solder. or clean the motherboard. — Eddie Geddy
Then the obvious thing to try is a new front camera. However if that doesn't work, then yes, you probably have an issue on the logic board. When the back camera created excess heat, that is usually a short condition and it may have damaged one of the voltage rails. There are three voltage rails for each camera (one of them is shared so that one is probably fine). — Minho
Yes, I will try changing the camera but the weird thing is that, I dont understand what happened the second i put the back camera in, the front broke. — Eddie Geddy

iPhone 6

Back camera not working, then front camera not working: Screen replace

1个答案

添加你的答案