跳转到主内容

Model A1285 / 8 or 16 GB capacity

206 个问题 查看全部

white screen of death on iPod nano 4g

i am having this problem,

ipod nano 4g turns on and came up with a white screen and gets three beeps

i tried reseting and restoring , it doesnt work.

its not screen problem i have replaced two times my screen also

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 2
3条评论

Dear ,I had the same problem..The solution is ; FORMAT the ipod COMPLETELY as external HDD and plug it to iTUNES for RESTORE action...Then Bingo..iPOD will be alive again as it should be...

完成的

What if its not recognized by iTunes?

完成的

I have this problem too, and can get to the restart screen with the white apple, but it won't connect to itunes and nothing else happens.

完成的

添加一条评论

3个答案

已选择的解决方案

Okay you can try this http://www.zolved.com/synapse/view_conte... and see if it works. I do know that this generation has issues with the logic board, but that usually manifest itself in another way. If this should not resolve the issue, I'd disassemble it and check the connection from the logic board to the LCD for corrosion and/or water damage. Also, of course make sure that all your connection are seated properly. Hope this helps and let us know....good luck

这个答案有帮助吗?

得分 2

2条评论:

That link is dead now.. could you please say the solution?

完成的

Partial solution found via the Wayback Machine, look it up to see the complete solution (it's too long to post here).

Reset the iPod:

Turn the Hold switch on, then back to off.

If the reset doesn't help, then put the iPod into forced disk mode.

Put iPod into Disk Mode:

Turn the Hold switch on, then back to off.

Press and hold the Menu and Select buttons until the Apple logo appears

Immediately switch your figures to press and hold the Select and the Play/Pause buttons until "Disk Mode" appears at the top ...

For a lot of people, this solves the problem. Connect the iPod to the computer and (assuming it shows up) reset the iPod again to get it out of Disk Mode. If at this point you still have the white screen, restore the iPod using the restore function in iTunes under the Summary tab (this will erase everything on the iPod and put it at factory settings).

Don't disconnect or eject the iPod until the store is totally done. After you think it's done, wait another five minutes.

完成的

添加一条评论

May be too hot or cold(device).

1) warm it up for 5-10 min.(cover it with something warm)

2) lock and unlock switch 2 times. Hold same time (home+select)

3) when it restarts(when screen turns black, immediately hold the Play/Pause button for +10 seconds.

Cold

1) put in refrigerator for 3 min tops and do the same thing.

:)

这个答案有帮助吗?

得分 0
添加一条评论

I had the same problem which nothing to do with LCD screen..it is SW related....The solution is ; FORMAT the ipod COMPLETELY as an external HDD and plug it to iTUNES for RESTORE action...Then Bingo..iPOD will be alive again as it should be...Take care..

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

tholu 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 11

过去 30 天: 53

总计 22,674