Won't complete start up process?
My iMac start showing black squares on its screen and then had distorted pixels on the display. It eventually got to the point where it will attempt to start up (bongs, shows apple icon and progress bar, but then goes to restarting in a continuous cycle. The start up screen is sharp and clear; it just can't complete start up.
I opened the computer up to see what the diagnostic LED's said. The four LED's are all lit up when the computer is plugged in and attempting to start up. LED's 3 and 4 go off when the computer restarts. I first thought the video card was bad but LED 3 is on, indicating that the computer and video card are working properly. Any ideas on what might be wrong?
1条评论
The problem was caused by a defective/corrupted hard drive. However, after installing a new hard drive, the original problem is gone, but I am unable to get the computer to boot from another disc or device in order to install the operating system (mac OS El Capitan).
I tried doing it using a time machine back up drive; a formatted USB flash drive with macOS El Capitan installer on it; and by trying to connect to the internet to download the OS. Nothing has succeeded. Ideas?
由 Cal Wurpts 完成的