跳转到主内容

Fourth generation of iPad, released November 2, 2012, available in 16, 32, or 64 GB models. Model Number A1458

217 个问题 查看全部

Charger broke off in iPad

My mom has a 4th gerneration iPad, model A1458. It has an electric wall charger with an end similar to the iPhone 6. While her iPad was charging, it fell from her chair to the floor, and the charger that is inserted into the iPad to charge broke in half, leaving half in the iPad with no way to get it out.

Any suggestions?

Thanks!

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

I just used tweezers for mine that broke off in it.. took me a few tries, but it came out!

完成的

添加一条评论

2个答案

已选择的解决方案

The plug does "snap" in place so it will require some light force to remove. Try some tweezers or fine point long-nose pliers. You may also try to pry it out (gently) with something pointy, working one side at a time.

Be careful because you don't want to do any unnecessary damage to the housing, port or glass.

If you don't have the proper tools, consider going to your local shop and they may do it for a low fee.

这个答案有帮助吗?

得分 2

1条评论:

This happened to me today. I used a small kitchen paring knife and pried at one end until it loosened and fell out.

完成的

添加一条评论

I would try and pry it out carefully with pointed tweezers :

https://www.amazon.com/URBEST-Compact-St...

try to keep the tweezers in the center of the port hold when prying the piece out because there are pins on the side wall of the port that can easily be damaged.

There are shops that do this type of thing for free. I do at my shop. I would call around and ask a few different shops.

这个答案有帮助吗?

得分 2

1条评论:

thank you for the link... this is so helpful. never had this happen before!

完成的

添加一条评论

添加你的答案

tshortgobucks 将永远感激不已
浏览统计数据:

过去 24 小时: 3

过去 7 天: 25

过去 30 天: 108

总计 18,033