这款4.7英寸iPhone于2014年9月19日发布,是iPhone 6 Plus的缩小版。

4418 个问题 查看全部

TouchID intermittent after screen replacement.

I recently replaced my cracked screen, moving the original home button from my old screen.

TouchID ever since works intermittently. One minute it will be working and the next it won't. I've noticed that if I lay the phone flat on a table, face down, and knock on the back a few times, most of the time TouchID starts working again until the phone is jostled around.

The button is properly seated, and the connector appears properly seated, the shield behind the home button is properly tightened but not too tight, and the flex cable appears undamaged. Powering on and off seems to have no effect.

Can anyone recommend what to look at next?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

3个回答

已选择的解决方案

After checking connectors it was still doing it. Decided to double check everything, did a backup then a Dfu restore.

Restored from backup and it seems to be working touch wood.

这个答案有帮助吗?

按维修分数 0
添加一条评论

On the board, check the connectors (lcd/digitizer/home flex/front camera) and try to clean away any debris that might be obstructing a flush connection. If that is not the case, the long home button flex cable that run behind the metal plate might be defective.

这个答案有帮助吗?

按维修分数 0

评论:

Thanks. I'd already checked the home button repeatedly but didn't think to check th screen connectors. One of them seemed slightly loose so I'll see how that's goes.

添加一条评论

Check the Home button connector and make sure all pins are in straight lines. remove any extra stuff on connector both on the home button and on motherboard. aslo check the home button flex. replacing it might solved the issue.

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

alex 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 4

总计 286