苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

1654 个问题 查看全部

Why is my iPhone 6S won't keep on

After having a water-damaged, I went to the apple service, they cleaned the main board with special liquid, my phone can work again. After a week, my phone suddenly turned off, I charged it two days later and its working. Same thing happened again. I wonder if I should changed the battery because it is 60% when it went off, but it has no power when I try to charge it? I try to plug it in charging right away but it won't turn on, I have to wait at least a day after.

Or is it about the LCD cause the screen went blur before the phone turned off?

Your answer / help would mean so much to me, thank you in advance.

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 0
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

4个回答

已选择的解决方案

I'm surprised apple would even offer that. If they did not replace the battery then most likely the battery got affected from the liquid damage.

这个答案有帮助吗?

按维修分数 4
添加一条评论

Hmm Apple Stores don't do water damage repair in house, they only do basic repairs, or swaps. Was this an Apple Store? Or an independent shop?

Either way, in my experience once you get liquid in the device you are better off using your money towards a replacement, as opposed to trying to get it repaired. Even after you clean a water damaged board it may (and probably will) continue to have issues down the line. You will end up spending more in the long run. Since it is able to boot at the moment I would do a full backup and go through either your insurance, apple directly, or an online vendor to get a replacement

这个答案有帮助吗?

按维修分数 0
添加一条评论

Sounds more like the Pmic chip Having contamination under the chip rust will cause many issues.

这个答案有帮助吗?

按维修分数 0
添加一条评论

If you aren't expert in testing cables u need to take it to an expert so he can test cables and ic's of ur phone

这个答案有帮助吗?

按维修分数 -1

评论:

You can't test individual ics on the board without taking the them off so what's the point?

there is a way by a flash which is connected at the same time with the motherboard to a computer and it will directly give u where is the problem on the board

添加一条评论

添加你的答案

raechalista 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 98