跳转到主内容

GoPro Hero5 Black是GoPro于2016年10月发布的高清防水运动相机。具有4k分辨率录制和语音控制,触摸屏显示和内置WiFi功能。

85 个问题 查看全部

Water Damage of GoPro

There was leakage of salt water into my GoPro, and then a flashy screen. My GoPro will now not turn on. I even put it in rice. Can you fix it?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 6
5条评论

Hello my go for hero 5 I enter water, then immediately remove the battery and let it dry for days,

After it was dry I turned it on and it worked fine, but at the time of using it the camera started to light itself and started to record or take pictures like crazy

I disarm it and clean it with an electronic cleaner that removes moisture, when dismantling it, check its internal parts and I do not observe any corrosion or damage.

I would like to know if you have encountered a similar situation, and if not what could I do?

REGARDS

完成的

I have the same problem. Did your GoPro work after cleaning?

完成的

Hello, my GoPro 5 also got water inside the screen. It was very frustrating because it is the third time using it on water. Any tips? it works but I don't think this camera is waterproof.

完成的

Hi, do you have a guide for water damage for GoPro Hero 6? Or can I follow the Hero 5 guide, is it the same?

完成的

添加一条评论

2个答案

已选择的解决方案

Hi,

Ifixit does not do repairs. Its' volunteers provide advice on how to fix it yourself or if you can't manage this then to get it professionally repaired.

As you know water and electronics and electricity are not a good mix.

The minerals in the water cause corrosion and the water also provides circuit paths for the electricity which were not in the camera's operating design and could damage the components. The corrosion process starts immediately and will not stop until it has been thoroughly cleaned away.

Rice is good to eat but does nothing to fix the problems caused by corrosion.

Don't Put Your Device in Rice. Here's Why...

First do not turn on your camera and then you need to with the camera turned off, remove the battery as soon as possible from the camera to minimize further damage.''

Then you need to completely dis-assemble the rest of the camera and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% or less and is not as effective. If you do check the label to verify the amount

Here is a link that in general describes the process.

Electronics Water Damage

As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.

You may also have to replace the battery as sometimes it is hard to recover a battery from water damage.

Hopefully after doing all this your camera might work properly again

Here is a link to the Ifixit repair guide for your camera which may be of some help.

GoPro Hero5 Black

If this process seems too daunting, take your phone to a reputable, professional camera repair service and ask for a quote for a repair. If you decide to do this, do it sooner than later.

这个答案有帮助吗?

得分 4
添加一条评论

I had the same problem my go pro hero 5 also got water damaged, it was in a pool but even so i put it in rice didnt help, charged it and it just got hot, mu advice is to watch the videos on how to take it apart and then wash all the parts in a 80% alcohol solution. mine isnt fixed yet but ive heard that it has worked for some people, very unhappy with go pro.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Lauren Herrmann 将永远感激不已
浏览统计数据:

过去 24 小时: 4

过去 7 天: 16

过去 30 天: 76

总计 37,356