iPhone not charging, "this accessory may not be supported."

Question

iPhone 6

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题查看全部

anthonriis @anthonriis

声誉积分: 13

2

1

发帖于: 2017年2月21日

更多选项

iPhone not charging, "this accessory may not be supported."

I have this iphone 6 motherboard that works almost fine, exept it wan't recognise the charging cable, and the message pops up: "This accessory may not be supported".

I have tried "millions" of different cabels, originals too, but it dosn't work.

I can charge it by turning the phone of while it is plugged in, but that is no good...

I have tried with diferent ports too, dosn't make a difference.

I have tried updating/restorering the phone, didn't help.

Could it be fixed by jailbreaking the phone and mabye run it on an older ios?

Could it be the charging chip (U2)?

Thanks for your help :)

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

Elijah @elijahsrook001 声誉积分: 217 9 4 2 · Answer 1 · 2017-02-21T15:26:46-07:00

最有帮助的答案

Elijah @elijahsrook001

声誉积分: 217

9

4

2

发帖于: 2017年2月21日

更多选项

one thing that may cause your iPhone to reject your charging cable is that your charging socket/hole/connector may be full of dirt, like lint, or dust. a good way to clean this out is with a toothpick, carefully. alternate scraping the dirt out and blowing in the charger port to loosen the dirt. dirt in the charger hole may cause a poor connection, including the error message

这个答案有帮助吗？

是否

得分 1

1条评论:

I tried conecting a completly new socket to the motherboard, didn't help.

The problem must be software related or some hardware failure on the motherboard

由 anthonriis 完成的 2017年2月21日

添加一条评论