After reassembling my PSP Go the Start & Select buttons won't work

Question

PSP Go

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

89 个问题查看全部

joel c @joelc29953

声誉积分: 47

1

发帖于: 2010年12月2日

更多选项

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 3

1条评论

This is how you replace it. https://imgur.com/gallery/JRRsJku

由 Player 完成的 2021年8月13日

添加一条评论

3个答案

已选择的解决方案

Aram @aram15281

声誉积分: 300

8

11

发帖于: 2011年1月10日

更多选项

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

这个答案有帮助吗？

是否

得分 3

2条评论:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

由 Ryan 完成的 2011年1月13日

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

由 joel c 完成的 2011年1月28日

添加一条评论

This is how you replace it. https://imgur.com/gallery/JRRsJku — Player
Here's a direct link to the page Aram is mentioning. PSP Go Teardown — Ryan
thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable. — joel c

Kat @kat78890 声誉积分: 1 · Answer 1 · 2013-05-16T09:42:59-07:00

Kat @kat78890

声誉积分: 1

发帖于: 2013年5月16日

更多选项

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

这个答案有帮助吗？

是否

得分 0

添加一条评论