跳转到主内容

Released February 2009. Model DVP-FX730.

3 个问题 查看全部

Replacement battery connexions for Sony DVP-FX730

The original battery was thrown out by mistake which had the 3 way male adapter. An article states that you can use two 3.7V batteries. The connection to the original battery has 3 wires, red, white and black.

Can you explain how the 3 wires should connect to the two 3.7V batteries?

I am an electronics engineer.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 1
3条评论

La bateria 9-885-129-95 @jayeff , cuenta con este sensor?

完成的

Does the battery 9-885-129-95 @jayeff have this sensor?

完成的

@rimartpeg

I don't know but if it is a battery with a 3 pin connector attached to the battery, then most probably it has. That's what the 3rd pin is for i.e. red = +ve batt., black = -ve batt. (earth or gnd), and the 3rd wire white = temp sensor.

The sensor would be in the battery packaging somewhere, fitted snugly between the cells of the battery.

Mostly battery temperature sensors are thermistors that change resistance value depending on the temperature but they are not all the same and the battery management circuit in the player would have been designed knowing the characteristics of the thermistor they selected so you just can't replace it with any other one, you would need to know which one.

Cheers

完成的

添加一条评论

2个答案

已选择的解决方案

Hi,

The battery shown at Step 6 in the Ifixit battery replacement guide for the player here. shows that the original battery was a Sony 890203401-815-G with a part number of 9 885 129 95.

Searching online using just these numbers brings results for a 7.4V 3200mAH 23.68Wh battery. They are very expensive.

With regards to your 2 x 3.7V batteries. They would have to be connected in series to give the 7.4V required, The white wire would have to be connected to some kind of thermal sensor to monitor the battery temperature.

这个答案有帮助吗?

得分 3
添加一条评论

@mcmonocle your connector calls for positive, ground and thermal sensor from the battery. Most likely to prevent overcharging. So you have to come up with a way of tricking the board to think you have that connection. Or just get a battery with that sensor. Sony part number is 9-885-129-95 for the battery

Block Image

Block Image

这个答案有帮助吗?

得分 2
添加一条评论

添加你的答案

Iain Glass 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 2

过去 30 天: 4

总计 1,190