跳转到主内容

The Kenmore Elite HE3 is a washing machine by Kenmore.

668 个问题 查看全部

Water pump clicks and gets hot

I've cleaned my hoses and taken the pump off and apart and I find nothing. It begins to click when about to spin it slowly spins and I eventually get the SUDS code. Funny thing is I get through one express load. Anything longer I pause it during the rinse cycle and let the pump cool for 30-60 minutes and the load will drain fine once I start it up again but I notice the pump gets hot after one load. If I complete one load successfully, the pump will be hot and won't do the next until I let it cool. So I suppose I should just replace the pump right?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

Veronica, I assume that pump runs all of the time during the wash cycle to filter the water during the wash.

Does the flow of water through the filter seem like the normal amount? You say you found nothing when you took it apart but did you notice any drag on the bearing? Any motor with a defect in the winding, such as a shorted turn on the winding, would heat up. If you have a clean impeller on the pump and no drag on the bearing, I would say, yes the motor is probably bad.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Veronica avila 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 9

总计 2,005