跳转到主内容

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2683 个问题 查看全部

Replaced full screen assembly now Touch-ID doesn't work

Recently replaced my screen along with the LCD screen, I took the original home-button and the backplate with the home-button cable and installed it. Went into settings and tried to set a Touch-ID and the error message "Failed Unable to complete Touch ID setup. Please go back and try again." I've tried all software related fixes that I could find on the webs but nothing worked. Please help!

回答此问题 我也有这个问题

这是一个好问题吗?

得分 2
添加一条评论

2个答案

最有帮助的答案

This seems to be a hardware issue, not a software issue. Did you make sure the connections were tight?

这个答案有帮助吗?

得分 1
添加一条评论

Are You working on a 6 or 6S? The 6 has the home button ribbon attached to the backplate which can easily get damaged. That can be replaced. If you damaged the home button than you are out of luck. If it's a 6S the home button ribbon is built into the screen and if that's damaged than you need another screen.

这个答案有帮助吗?

得分 0

1条评论:

I took the original thingy that the home button cable was attached to, homebutton is also original and sits in my phone still.

完成的

添加一条评论

添加你的答案

bamsemcpro 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 137