苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3839 个问题 查看全部

Error 4013/ Red screen with blue screen

Hello guys,

I have a problem with my iphone 5s. The phone stays in a reboot loop. After i connected it with the iphone and try a recovery, it gives me error 4013. I tried 2 screens, changed the back camera, and tried the recovery without the screen plugged on the iphone.I also tried three different batteries. The original one, and two fake ones. I keep getting flashes of a blue and a red screen in the recovery process. I also tried two different systems with itunes and keep getting the same error, also changed the lightning cable.

I am out of options. Can someone help me?

回答此问题 我也有这个问题

这是一个好问题吗?

按维修分数 2
添加一条评论

所有超过US$100或包含 Pro Tech工具包的订单免费送货!

浏览我们的商店

5个回答

最有帮助的答案

It sounds like a case of long screw damage.

https://www.youtube.com/watch?v=TzlsG1M1...

That video shows how to repair and diagnose it.

这个答案有帮助吗?

按维修分数 3

评论:

i see in the video that she uses a lot of advanced equipment. Can this be done with simple hometools?

Short answer: NO

添加一条评论

try and restore without screws on the fones some times it works and make sure u use a good cable

这个答案有帮助吗?

按维修分数 0

评论:

Must I remove the logic board screws?

yes all of them

if you are thinking of heating the u2/ic chip ...make sure u apply a little heating , becos last time i tried to heat it the phone ended up dead...

添加一条评论

Could it be something else? Because I also read something about the u2/ic chip reheating.

这个答案有帮助吗?

按维修分数 0
添加一条评论

if you are thinking of heating the u2/ic chip ...make sure u apply a little heating , becos last time i tried to heat it the phone ended up dead...

这个答案有帮助吗?

按维修分数 0
添加一条评论

The error is a hardware problem no solution for the error i am also try but not successed...

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

Rachid El Bali 将永远感激不已
浏览统计数据:

过去的24小时: 1

过去的7天: 28

过去的30天: 130

总计 10,012