跳转到主内容
问题已关闭

Installed as directed, but connection drops & signal strength is low

I purchased this part from your company. I installed this correctly on my A1150 and am running Snow Leopard 10.6.4. My network utility showed that N was available and I'm able to connect to the net. I also install all relevant updates from the apple website.

I'm am experiencing regular drop outs and have to turn Airport on/off regularly to connect the to the net for short periods of time. When it is working, the signal strength fluctuate from high levels to low levels until I turn airport on/off.

I have scoured your site for an answer and have found nothing. Please help me.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
2条评论

Mind telling us which part you installed?

完成的

Probably the wireless card since it's one of the tags.

完成的

添加一条评论

1个答案

已选择的解决方案

Check your

wireless router's setup. The N-Transmission Rate, Beacon Interval, DTIM Interval, Fragmentation Threshold, RTS Threshold could be set poorly. Default settings are fine for most situations, but some changing of settings even simply the broadcast channel might make a difference, especially in an environment with heavy 802.11b traffic.

Other devices or emissions emitting hardware nearby could interfere. (I have seen old TVs, radios and cordless phones interfere with wireless networks).

Remember to return and mark accepted the answer that best solves your problem.

Good luck,

N

这个答案有帮助吗?

得分 0
添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,139