修复你的物品 社区 商店

苹果官方于2015年9月25日正式发售iPhone6S A1688/A1633机型。 此机型的修理方式与先前几代差不多, 需要螺丝起子及撬棍工具。 同时也适用GSM or CDMA/16, 64 or 123 GB/ 银色, 金色, 深空灰色, 玫瑰金色等机型。

2688 个问题 查看全部

更多选项

Backlight flashes for a second before turning off

I have an iPhone 6s and I received a replacement screen to swap out the cracked screen. The screen replacement went without issue, but after installing the new screen. I can turn on the phone and the backlight will flash for a moment before turning off. The backlight comes on fine when the phone is completely dead and plugged in showing the white/red charge icon. I have attempted to reset the device, but still have no working backlight. Any suggestions?

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 1
2条评论

Was the battery unplugged throughout the whole screen replacement process? If not then the backlight filter may have been shorted when unplugging / plugging in the display ribbon cables.

由完成的

did you observed abnormal heat before battery dead?

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的
最有帮助的答案

更多选项

Ryan Collins ,

Unplug the LCD connector and charge the phone around 15 mins then unplug the charger and connect the LCD connector and check whether phone charge at last 5% if it is something wrong with your new LCD backlight. otherwise you may need to check the logic board.

这个答案有帮助吗？

是 否
得分 2

1条评论:

Yep. I don't think anything blew since the circuit does work. He could also leave the phone turned off, plug it in for an hour or two, then reset using home and power held down until the Apple logo appears.

由完成的

添加一条评论

添加你的答案

Ryan Collins 将永远感激不已
浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 287