跳转到主内容

首先 你得要准备一部iPad Air(1rd Gen)只支持Wi-Fi的机型 这里我们指的是A1474机型 它拥有64位的A7双核处理器并拥有16,32,64GB甚至是128GB的内存选择

299 个问题 查看全部

iPad Air Digitizer / Touch Screen not working

I have been trying to repair an iPad Air screen for a friend.

The touch was not working at all , but the home and power buttons were working fine. Firstly I tried doing a factory restore but the issue still remained; no touch response at all. I then tried opening it up to test for loose connections, I unplugged all connections relating to the digitizer and replaced them - this still did not solve the issue.

I have now tried buying a new digitizer, though not an official one, and after fitting it the same problem is still occurring - no touch response at all.

So is this a motherboard issue, or am I missing something? Any help and guidance would be appreciated as this is not something I had previously done before.

Thanks

Marty

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

while uncommon in iPads, it is possible that its the touch sense chip on the mainboard. That would really only make sense if the iPad got wet or had a bad drop.

If it were me, I'd try cleaning the digitizer connectors and the motherboard connectors with 99% IPA. Flood them and then let them air dry. Check for any damaged teeth on the connectors and if they look good, plug it all back in and give it a test. Also, the metal pieces on the back of the connectors likes to bend upwards, making it impossible to get a proper seating. Make sure that piece of metal is straight.

If that doesn't fix it, its probably the touch sense chip.

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

martywild10 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 1,445