Why the device doesn't turn on with the new display assembly?

Question

iPhone 5

Apple发布于2012年9月12日的第六代iPhone，维修时与前代型号一样，需要螺丝刀和撬棒。iPhone 5以多种版本销售：通讯制式有GSM/CDMA；存储容量有16/32/64G；颜色有黑/白。

2522 个问题查看全部

Rocco Lorusso @rok

声誉积分: 33

2

发帖于: 2016年8月4日

更多选项

Why the device doesn't turn on with the new display assembly?

After the display assembly replacement, the device doesn't turn on, but only shows (full screen) the battery (as if it would be out of charge) and the lightning plug icons.

Once I plug it in, only the battery icons remain, and if I disconnect the battery (while the plug is in) it shows the apple logo for a few seconds and then gets shuted down.

Is there something I could try before contact the vendor asking for the replacement?

Thank you all ^^

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

Klaus Lehmbecker @klausibert

声誉积分: 79

5

1

发帖于: 2016年8月4日

更多选项

Try disconnecting the battery and reconnecting it again after a few seconds. I had a similar problem and this worked for me.

这个答案有帮助吗？

是否

得分 1

3条评论:

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again!

由 Rocco Lorusso 完成的 2016年8月6日

Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time.

由 Ben 完成的 2016年8月6日

You're very welcome, glad it worked:)

由 Klaus Lehmbecker 完成的 2016年8月9日

添加一条评论

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again! — Rocco Lorusso
Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time. — Ben