跳转到主内容

Repair guides and support for motorcycles manufactured by the German motor group, BMW.

18 个问题 查看全部

Why wont 1985 bmw k100 stay running

have 1985 bmw k100. turn key, hear fuel pump. press starter, bike starts right up, then sputters and dies. then hear fuel pump again, will start right up again, sputter and die. when engine starts, i dont hear fuel pump. I have changed the ECU and the fuel pump relay.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

最有帮助的答案

Too many causes to provide an "answer". On the K's the pump is wired off the level sensor.

I'd lift the pump out, disconnect both + & - wires (put hose over ends=no sparks) and directly put wires on the pump, - to ground & hold the + to the battery just as you start the engine.

This will parse a mechanical vs electrical problem.

If it runs ok, it's electrical: get the Clymer manual (M500) to trace power wiring.

If it still sputters & dies, I'd put pressure gauge inline of pump to injector rail. It should be ~38psi.

The regulator may be bad (pinch the hose of rail to regulator to see), but more likely the pump can't keep up.

I've build 3 K bikes from wrecks and worked on many others.

这个答案有帮助吗?

得分 1
添加一条评论

Yes—This could be caused by many things. —- Also consider faulty Hall Effect Sensor, which is used as a crankshaft position sensor. Their failure is not uncommon in older K100s.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

bryan christensen 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 7

过去 30 天: 26

总计 1,511