声誉积分: 13
1
hello
i have been repairing phones/cameras and anything else i can get my hands on for many years and this is the first phone thats giving me a lot of trouble. i have tried a few different screens and all i get is a black screen. i can see the apple logo when i force a reboot and i had a brief flash on light on the screen when i connected a charger. i have cleaned all the joints and connectors.
anyone have any ideas on any other tricks
声誉积分: 611
7
The other few things to check would be the 2 connectors that control the display and the backlight. Those connectors can bend quite easy, verify that they are flat before placing them on the logic board and work from one side to the other to help ensure correct seating. You mention the screen flickered or lit up? Apple can be funny with diagnostic codes. Sometimes the code is displayed via a certain color millisecond splash screen "flicker". Also, the proximity sensor and ambient light sensor can be damaged easily in those repairs and may keep the device from booting to protect itself. Occasionally by disconnecting just the flex cable from the logic board that contains those sensors and the front facing camera, will allow it to boot fully and confirm the issue. Best of luck
这个答案有帮助吗？
Can confirm this, have damaged the proximity sensor a few times causing the phone not to boot up until unplugging the front camera assembly ribbon cable.
This was not cause of my problem and phone is acting same way. Anyone have any other troubleshooting ideas?
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 185
2条评论
This sounds like a issue with the backlight ic on the logic board. I'd wait for others to comment as they probably know more about this kind of issue.
由 Ben 完成的
is there any way you can get a light behind the screen? if the backlight burnt out, using a light behind the screen should help figure out if theres nothing showing on the screen or if the backlight is having issues.
由 josei 完成的