跳转到主内容

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似,需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3530 个问题 查看全部

iPhone wont power up after it had no battery left

Hi everyone,

A costumer came to the store for a new charging dock, but i didn't disconnect the battery for this repair after i replaced the charging port the phone wont power on,

so i disconnect the battery and replug but still same result,

i tried a new battery in it and it works fine.

phone works perfect untill battery drains to 0% and the costumer cant charge it again then.. it gives the charging logo but it wont go to 1% or even start up.

but as long the battery don't drain lower then 1% everything works fine you can charge you can call you can do everything..

anny1 knows this issue?

thanks alot for reading this

greetz

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

The U2 ic chip needs replacing on the motherboard. It was either already damaged or leaving the battery in shorted it out. The chip controls charging. Always unplug the battery during any repair. I know these things rarely happen, but it's still a best practice to unplug the battery.

这个答案有帮助吗?

得分 1

2条评论:

thanks ,

i just tried another battery and let it charge till 100% and the problem was gone lol

完成的

Good, so just a bad battery. In the future if you ever get one that wont charge at it all, its definitely the U2 ic chip.

完成的

添加一条评论

添加你的答案

Brian ifikske 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 75