Why is my MacBook heating up when photos open?

Question

MacBook Pro 15" Unibody Mid 2010

Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66 GHz Core i7 Processors

591 个问题查看全部

Tara @troses1

声誉积分: 53

2

3

发帖于: 2016年5月18日

更多选项

Why is my MacBook heating up when photos open?

I recently replaced my hard drive with the 1TB hybrid drive from iFixit. I also upgraded the RAM from 4GB to 8GB. I'm a novice at this so I thought things went pretty well. Now my mac seems to instantly heat up and start running hot when I open photos. Any ideas or help would be appreciated. Thanks!

On another note, it also seemed to be running extremely slow a couple of times when photos wasn't open but I had a couple of webpages open. Could that have been particular pages?

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

4个答案

已选择的解决方案

Dan @danj

声誉积分: 478.9千

Self employed contract worker

35

329

970

发帖于: 2016年5月19日

更多选项

Sounds like you have a bad SATA cable.

Follow this IFIXIT guide: MacBook Pro 15" Unibody Mid 2010 Hard Drive/IR Sensor Cable Replacement and you want to use this cable: MacBook Pro 15" Unibody (Mid 2012) Hard Drive Cable

I would also check the systems firmware. Follow this Apple T/N: About EFI and SMC firmware updates for Intel-based Mac computers

产品

MacBook Pro 15" Unibody (Mid 2012) Hard Drive Cable

$19.99

这个答案有帮助吗？

是否

得分 3

6条评论:

Hey Dan,

So I noticed it's not just when photos is open. I just left it open and it went into "sleep mode" and I closed it and when I came back to it the fans are loudly blowing away. Also, I was watching a short 3 minute video to see if I needed to reinstall drivers for my printer and the fans kicked in and said it was using 200% of my cpu. Would the bad SATA cable still be your analysis?

I checked the firmware and I have what's listed for my model.

Thanks.

由 Tara 完成的 2016年5月19日

Yes, it's likely! Double check what process is running under Activity Monitor. If the indexer is still running let it run without doing anything until it ends (if Tom is correct). If you don't see any process running heavy with nothing running then its the SATA cable.

The problem is the CPU & HD are having a tug of war here. The data block being moved between them has a CRC but the CRC doesn't match so the block then needs to be transmitted again and again until the CRC matches. This taxes the CPU & HD as they fight it out. The system heats up which then forces the fan in to high RPM.

由 Dan 完成的 2016年5月19日

Thanks again Dan :)

由 Tara 完成的 2016年5月19日

Hey Dan,

If you get this, you suggested I get the Hard Drive cable for the Mic 2012 MBP. Did you mean 2010?

Thanks! Tara.

由 Tara 完成的 2016年12月8日

Nope! Here's the full poop: Why are hdd cables failing?

由 Dan 完成的 2016年12月8日

显示更多的1条评论

添加一条评论

Hey Dan,

So I noticed it's not just when photos is open. I just left it open and it went into "sleep mode" and I closed it and when I came back to it the fans are loudly blowing away. Also, I was watching a short 3 minute video to see if I needed to reinstall drivers for my printer and the fans kicked in and said it was using 200% of my cpu. Would the bad SATA cable still be your analysis?

I checked the firmware and I have what's listed for my model.

Thanks. — Tara
Yes, it's likely! Double check what process is running under Activity Monitor. If the indexer is still running let it run without doing anything until it ends (if Tom is correct). If you don't see any process running heavy with nothing running then its the SATA cable.

The problem is the CPU & HD are having a tug of war here. The data block being moved between them has a CRC but the CRC doesn't match so the block then needs to be transmitted again and again until the CRC matches. This taxes the CPU & HD as they fight it out. The system heats up which then forces the fan in to high RPM. — Dan
Hey Dan,

If you get this, you suggested I get the Hard Drive cable for the Mic 2012 MBP. Did you mean 2010?

Thanks! Tara. — Tara

Tom Chai @tomchai 声誉积分: 73.8千 19 111 82 · Answer 1 · 2016-05-19T10:40:48-07:00

Tom Chai @tomchai

声誉积分: 73.8千

19

111

82

发帖于: 2016年5月19日

更多选项

Actually it does not sound like something is wrong.

If you have recently imported a huge number of photos, the app will need to index them and it can run hot for a while. Just let it run until it finishes.

这个答案有帮助吗？

是否

得分 2

1条评论:

@ Tom - I would agree if the indexer was still going on. She only sees the high CPU load only when opening her photo's & vids. Which aims me to the SATA cable.

由 Dan 完成的 2016年5月19日

添加一条评论