跳转到主内容

display showing " please Wait "

How can i fix the error of my sony home theater? After power supply screen show WELCOME then went of. then i press turn on button and its showing Please Wait in the screen. nothing working. Not even remote.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 6
5条评论

Hi, just verifying, that Sony BDVE450 is the correct model number as it doesn't seem to be listed on the Sony support site?

完成的

sorry its BDV-E490

完成的

Pls help me my sony model HCD-FLX5D IS NOT WORKING SAYING PLS WAIT can u say how to clear thee problem and my disc sselect is coming and when i press open button its say pls wait and the speakers are not working

完成的

I have sony hcd-gzr5d set.all ways displayd please wait.

完成的

Hello sir.. Need help my home theatre decoder SONY DAV DZ810 happen PLEASE WAIT problem. Pls

完成的

添加一条评论

2个答案

已选择的解决方案

Hi,

Ensure that there is power connected to the player. If the player still tries to start but doesn't get past the 'Please Wait' message try the following and see if it 'resets' your player.

1. Turn off the player.

2. Switch off the power at the wall outlet and remove the power cable from the outlet.

3. Leave the player disconnected for about 1-2 minutes.

4. Reconnect the power cable to the wall outlet and turn on the power at the wall outlet.

5. Turn on the player,

Hopefully this procedure will reset the player.

这个答案有帮助吗?

得分 3

4条评论:

Tried this several time - did not work. All I get is the flashing please wait message.

完成的

It actually worked. I was getting super irritated with the disk holder not opening . And it continuously saying please wait ! And i tried this and it worked !

完成的

Didn't work. Remote doesn't even connect either.

完成的

Ihave sony hcd-gzr5d set.allways displayd "please wait".please help me sir

完成的

添加一条评论

Not sure if any one is following this any more, but i was able to bypass the system check for the dvd to allow audio from the other sources. Sony HDX466 DVD player. I removed all cables to the dvd, There is a 6 pin connector that provides power to the sled and the spindle, and 2 pins in the center marked LIMITER and GROUND. Jumper these 2 pins and you will have sound from the other sources.

这个答案有帮助吗?

得分 0

2条评论:

Can you show me how to make the bypass

完成的

My name is Tokunboh Peter, Pls can you tell me how to bypass the pins mentioned please. Thanks

完成的

添加一条评论

添加你的答案

Rajdeep Dutta 将永远感激不已
浏览统计数据:

过去 24 小时: 1

过去 7 天: 8

过去 30 天: 60

总计 20,344