跳转到主内容
问题已关闭

I need fix problem Boot Loop

Install rum rate phone galaxy star duos

But then I found out that I used CMW version less than required for installation

And got me a problem in the boot where the phone attached to the company's code does not enter the system

And I think that happened to me the problem boot Loop

I tried many ways but I did not succeed

Is there a solution may please ?

Block Image

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
1条评论

thank you guy

fix problem by Odin + Frimware

完成的

添加一条评论

2个答案

已选择的解决方案

Block Image

firmware file find sammobile.com

download letest firmware

turn off mobile press home button+volume down+power button

phone in downloading mode

download odin tool

select file

connect phone in pc

then start

这个答案有帮助吗?

得分 2

2条评论:

thank you for help

i fix problem :)

完成的

Hello, my Samsung galaxy star is stuck on the logo. I tried the home button, off button, home button method and everything I could find to reset it, etc but every time it goes back to Samsung logo, I don’t know what to do.

完成的

添加一条评论
最有帮助的答案

Disclaimer: You will lose all data in your internal storage on the phone if you follow the steps below.

Steps to Factory Reset most (if not all) Samsung phones:

  1. Turn phone off by taking battery out for 30 seconds or force turning it off (if you don't have a user removable battery) via holding power button and volume down button.
  2. After that Boot your device into Recovery Mode. You can do this by holding the Volume Up + Home + Power keys. When the Samsung Logo pops up, stop holding the power button but keep holding the rest.
  3. Once your android device is in Recovery Mode, Go to the “wipe cache partition” option and select it.
  4. After that go back to the recovery main menu and reboot the device by “reboot system now” option.
  5. If the device again stuck on Android Boot Loop pull out the battery again or power off by other method specified above and follow the steps above again. This time also “wipe data/factory reset” and then reboot device.

Now your device should come out of the Android Boot Loop and at the first time the device will take some time to reboot.

If these steps still don't work then you may need to restore the software on your phone via Samsung Kies. If I can remember you do it via Tools > Firmware upgrade and initialization. This will prompt you to enter the model number and the serial number of the phone which is usually at the back of the phone or in the battery compartment.

这个答案有帮助吗?

得分 3

1条评论:

thank you for help

i fix problem :)

完成的

添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 6,006