hello,
i've ripped the flex cable connecting the home button and from what i've read there is no way i'm going to salvage this.. sucks but whats done is done.
so my question is do i need to buy another home button and flex cable for this button to function correctly (minus the touch ID feature) or will i be able to simply install the button i already have without linking it to anything.
Thanks in advance.
声誉积分: 73.8千
19
111
82
You can connect the torn cable however it will be difficult.
The home button has to be connected, or you can't reset the phone or enter recovery mode, which can be useful when you needed.
这个答案有帮助吗？
how do i connect the torn cable? or even what sort of place could i take this to to be fixed.
and so if this isn't possible it's best i buy another home button?
Thanks
声誉积分: 2.1千
4
4
It depends on which part you have damaged if u have damaged the home button which has got the flex built into it then you just get a new button and u get click working again but no touchid… if you have damaged the flex that runs under the lcd plate from the phone board to the home button flex then you can just replace that and if it's a good quality one the button and touchid should still work :)
Eg
iPhone 6 and 6 Plus Home Button Assembly
Changing this if that's the bit you have broken will give u button but no
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 75
