Phantom 3 Pro OFDM plastic receiver broke off?

I was flying my Phantom 3 pro had a minor crash (if minor is even possible). The only part that broke was the plastic connection on OFDM board (the plastic piece that connects the small wire harness from OFDM to gimbal).

Possible to solder it back on or do I get to spend almost a 1/3 of what I paid for the entire drone, on a new OFDM receiver module?

Any other advice?

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论