How can I repair the vibrator connectors?

Question

Samsung Galaxy S III

The Samsung Galaxy S3 is a multi-touch, slate-format smartphone with eye-tracking ability, increased storage, and a wireless charging option.

459 个问题查看全部

Atomic Nat @atomicnat

声誉积分: 1

发帖于: 2016年1月7日

更多选项

How can I repair the vibrator connectors?

I received a hand-me-down GS3 from my brother. The vibrator did not work when it was powered on nor afterwards when the phone was completely booted. I opened up the phone, and sure enough one of the connectors on the logic board were missing. I purchased a broken logic board of the same model (the nand storage is fried, according to the seller), and was wondering if I could remove one of the connectors from that logic board and reinstall it on the hand-me-down with solder paste.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

1个答案

Johnathan George @johnathangeorge 声誉积分: 257 4 2 · Answer 1 · 2016-01-07T15:59:39-07:00

最有帮助的答案

Johnathan George @johnathangeorge

声誉积分: 257

4

2

发帖于: 2016年1月7日

更多选项

I would just use the solder that's already on the board. Just heat the contact with your iron until it's loose, and then grab it with tweezers and lift it away. Set it in position on the other board and hold it in place with the tweezers while you heat it with the iron until the solder melts. Remove the iron and continue to hold it in position until it cools and the solder hardens (probably less than 10 seconds) and you should be good to go.

这个答案有帮助吗？

是否

得分 1

添加一条评论

Samsung Galaxy S III

How can I repair the vibrator connectors?

1个答案

添加你的答案