Guidance requested for installing Camera & Sensor Cable Shield Sticker

Question

iPhone 5s

苹果 iPhone 5s 于2013年9月10日公布。该设备的维修与以前的型号相似，需要螺丝刀和撬棒。可使用GSM或CDMA / 16、32或64 GB。颜色有银色、金色和太空灰。

3531 个问题查看全部

问题已关闭

ellamama @ellamama

声誉积分: 57

5

3

发帖于: 2015年12月21日

更多选项

Guidance requested for installing Camera & Sensor Cable Shield Sticker

After my first "fail" in repairing an iPhone, I'm starting over, with new parts. In addition to a new front panel (I tore a cable on the "old" new front panel), I also ordered a new Camera and Sensor Cable Shield Sticker to replace the original one which looked pretty worn out after having been removed and replaced at least twice.

After reviewing assorted how-to guides, I've yet to find one which details how to go about replacing this part. I'm planning on just figuring it out as I go along, but I'd sincerely appreciate it if others would share their experience/advice. (I'm really hoping to avoid future problems with this project!)

Thanks in advance for sharing your knowledge.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 0

1条评论

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision.

由 ellamama 完成的 2015年12月21日

添加一条评论

1个答案

已选择的解决方案

WiN6MaN @win6man

声誉积分: 73

2

发帖于: 2015年12月21日

更多选项

It sticks right behind the camera itself, you need to separate the camera and the ribbon a little. But be careful to not separate it to much or you'll break the ribbon.

Honestly tough this sticker is not crucial and even if it's not there the camera/light sensor will work just fine.

I think it serves as a ground to avoid or lessen screen static.

这个答案有帮助吗？

是否

得分 0

添加一条评论

Thanks @WiN6MaN. After debating the risk of damaging the ribbon vs. the need for the sticker in the first place, I opted to stick (no pun intended) with the original Cu sticker. Hopefully I won't regret this decision. — ellamama