声誉积分: 465
7
5
Replaced the glass on an S3 and changed the frame. when the back plate is on (the one that screws in) the battery cover won't clip in and there's a gap because of this
does anybody know why?
it's doing it on the old frame as well, and tried a different battery cover
声誉积分: 2.2千
10
4
3
If the frame is not the exact one, for example the i535 frame will only work with the i535 motherboard. The motherboards are slightly different but can still fir i would check this first(see below)
https://www.gazelle.com/thehorn/wp-conte...
for example this one is the T999. You find this by taking the model number and remove the first 3 letter and the dash.
这个答案有帮助吗？
the motherboard fits fine
Double check it may fit fine but there are differences, I fought with this issue before and I am sure thats the issue. what was the frame number on the old one and the new one?
Turns out the frame is defective. just going to replace the frame, i have a frame seperator so it's not an issue
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 62
