My 6 plus was almost destroyed completely after it got bent. I have taken out all the components out and ordered a new housing. Everything seems to be fine but the logic board. The bottom and second to last bottom pieces have come almost completely disconnected and are only being held together by a little wire on the side. Is my logic board a lost cause? I have so many pictures and videos on it
声誉积分: 73.8千
19
111
82
It is almost impossible to transplant the chips, especially for iPhone 6. For some reason the board is almost completely impossible to rework.
If you do wish to try anyway, I recommend transplanting the CPU, NAND memory, baseband, baseband EEPROM, NFC controller and a chip called "anti-rollback EEPROM" on the schematics. Also get the original home button connected to the board, somehow all these chips are cryptographically paired together and the phone is likely to refuse to boot if one of these chips are not paired with others.
这个答案有帮助吗？
Not impossible to "transplant" chips. I do that daily.
It's actually easy.
声誉积分: 57.5千
18
77
212
Uh well, ya see. Sorta. If you have lots of experience in mirco soldering, this could be ok. You have all the parts from your old board, so you could buy a bare board, their pretty cheap, about $10. So you could potentially migrate those parts from your old board, to the new one. I can't say, cause I haven't seen a picture of your board, but I'm guessing it's shot
这个答案有帮助吗？
No one can transfer all the components, including the massive NAND and CPU chips to a bare board. This is ridiculous.
Oh, well .. I didn't know that
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 319
3条评论
This question was migrated from http://meta.ifixit.com/Answers.
由 iRobot 完成的
Post some images of your damaged board with your question. That way we can see what you see. 在已经存在的问题里加入图片
由 oldturkey03 完成的
Show us a picture so we can see if there is any hope.
由 jessabethany 完成的