Battery Connector ripped off allong with all Soldering pads.
I have an Iphone 4S with completely Ripped OFF Battery connector along with three soldering pads. The thin brown layer on the board at the soldering pads is sticking out. Please look into the images . One image is highlighting the brown layer of board sticking out. Help me fix it. Also let me know good point soldering guns suitable for the phones. Thank you.
2条评论
Shiv, post some images of your damaged board with your question. Here is the guide for that 在已经存在的问题里加入图片
Also, you will have to be pretty good at soldering before even trying to attempt to solder anything on those boards :-)
由 oldturkey03 完成的
@oldturkey03 Hey, Thank you for your suggestion. I've added the images. In the second image, you'll see a soldering pad sticking out from the board Do you think It would be Okay? I don't know the respective points of the soldering pads aligned to the next 6 little pairs of nodes. I have soldering experience in regular PCBs. But am learning the micro soldering. So I make this work, I'll be good at micro soldering too!!
由 Shiv 完成的