修复你的物品 社区 商店

这款4.7英寸iPhone于2014年9月19日发布，是iPhone 6 Plus的缩小版。

4994 个问题 查看全部
问题已关闭

更多选项

Sensor/FrontCam Flex suddenly dead after screen replacement

Hello!

I have replaced a bit over 100 iPhone 6 screens now and about 5 of them the sensor flex has just died out of nowhere!

Sometimes the proximity sensor stops working completely or if won't transmit any sound to the earpiece/receiver. Never had any problems with the camera tho.

And its not that I just place it wrong it really breaks!

Very annoying but thankfully not that common. NEVER had this problem on a 5 or 5S

Anyone know what might be the cause of this? Maybe the p-sensor is sensitive and is damaged even though I handle it with care, but the sound??

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0
添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

It's the alignment of the proximity sensor most of the time also make sure the little black square piece of rubber is seated where the sensor goes.

If it still does not work u need to replace the sensor as taking it off, no matter how gentle you are will cause the problem. Remember it's a fragile flex cable

这个答案有帮助吗？

是 否
得分 0

1条评论:

It is not a question about the alignment I know all la about placing. the sound really breaks.

Yes ok sensitive p-sens might break more easily but sound should still work.

I was one of the first to replace a screen here in Sweden I have done it hundreds of times after that.

由完成的

添加一条评论
浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 92