The Kodak EasyShare C913 is a 9.2 MP digital camera.

13 个问题 查看全部

Camera not turning on.

I got this camera for my wife. She's been using it without any problem. But after she put it away for a while, the camera would not turn on even with new batteries installed. She probably did not use the camera for 3 months or longer with the batteries in it. Did the batteries ruin it?

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 3

评论:

Thank you all for your suggestions, but the camera still does not turn on because I don't think it's the batteries. There was no corrosion at all. It might be a short circuit in which case I have no way of fixing it except to take it apart. Even if I did that, I would not know what to look for.

添加一条评论

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

3个回答

已选择的解决方案

Have you tried a water and baking soda mix. Using a Q-tip to clear up the acid?

这个答案有帮助吗?

按维修分数 -1
添加一条评论
最有帮助的答案

NINO Sylmar, just to clarify those batteries do not leak acid. You most likely were using standard alkali batteries, there is no acidic electrolyte. The substance that leaks from those batteries is potassium hydroxide which is alkaline and can cause severe corrosion. Clean it properly with a qtip and some vinegar. Then dry it of with a qtip and some sterile water, rinse with isopropyl alcohol.

这个答案有帮助吗?

按维修分数 2

评论:

cleaning the battery terminals worked just like a miracle ! I was ready to break the camera until I tried this.

添加一条评论

This must be a common issue with Kodak. Pathetic

这个答案有帮助吗?

按维修分数 0
添加一条评论

添加你的答案

NINO Sylmar 将永远感激不已
浏览统计数据:

过去的24小时: 2

过去的7天: 14

过去的30天: 40

总计 779