跳转到主内容

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

154 个问题 查看全部
问题已关闭

Some part of screen are unresponsive after digitizer replacement

Broke my front glass so I had it replaced with new digitizer.

Now after the replacement few parts of the touch screen are not responsive while others are fine.

What could this be? Even when the old glass was cracked, everything was still working smoothly.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

2个答案

It is most likely a defective part. Double check the connectors and make sure everything is tight. If any areas of the cable aren't making contact fully this can happen. If the connections are good then the part needs to be warrantied.

这个答案有帮助吗?

得分 0
添加一条评论

There are really only a couple things this could be: A bad digitizer or the connections not being made. Clean off the digitizer connection cable and clean the connectors with 99% or 91% IPA. Make sure to check the connectors really well for damage. There is something about the iPad 3's connectors that like to break.

As always: use plastic tools and take your time. If you don't see any damage and the screen is still flaky, you know its a bad screen.

这个答案有帮助吗?

得分 0
添加一条评论
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 133