跳转到主内容

修复你的物品

维修的权力

商店

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

122 个问题 查看全部

After replacing digitiser, I'm getting blue red white vertical stripes

Just replaced the digitiser kept the lcd connected.

Checked the lcd cable, disconnected the battery.

Still getting on boot black screen with a vertical white stripe.

This changes to blue white red etc, no image.

When shut off I'm getting two white stripes on a black background.

The lcd worked fine prior to pull in the old touch off.

I've tried tapping the rear of the unit, that pulls more blue up on the screen.

I've even put the old touch screen to no avail.

Could it be the LCD Image Filter component

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

3个回答

Have you tried a different LCD and LCD cable? I'd start there. You said the lcd was never disconnected? I guess that means there isn't glass shards stuck down in the connector (i've seen that a couple times)

If you've tried the lcd and lcd cable, next I'd start chasing on the board looking for something damaged. If you've got a microscope it'd be super handy for this. I'd suspect you're looking for physical damage, tool damage of some sort.

这个答案有帮助吗?

得分 0
添加一条评论

Not got a replacement lcd and lead to test.

I'll have a look around the cable and sockets.

The lcd looks clear of debris.

I'm steering towards the filter capacitor near the socket.

All the components have been checked and ok.

ive cleared out more glass and even ordered the lcd ribbon cable.

这个答案有帮助吗?

得分 0
添加一条评论

It's most likely the LCD. Try reconnecting the cables, if that doesn't work, it could be a logic board malfunction.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Toxic 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 87