跳转到主内容

许多佳能数码相机和胶片相机的修理和拆卸指南。

1786 个问题 查看全部

trouble massage like Ubdate Firmware *Bios Mode*

my printer write a massage when i want to print an on the printer the massage says

Ubdate Firmware

*Bios Mode*

wait updating F/W

2010/10/28 Vo.01

Canon ImageRUNNER 2422 2420

回答此问题 我也有这个问题

这是一个好问题吗?

得分 49
2条评论

Have u solved it? I have the same problem. Thanks

完成的

plz help i need a help

完成的

添加一条评论

15个答案

最有帮助的答案

ok then how can I solve this problem plse help how can I do " Ubdate Firmware

*Bios Mode*

wait updating F/W

2010/10/28 Vo.01

Canon ImageRUNNER 2422 2420"

这个答案有帮助吗?

得分 19

2条评论:

Have u solved it? I have the same problem. Thanks

完成的

canon ir 2420 update firmware bios mode

完成的

添加一条评论

ok then how can I solve this problem plse help how can I do " Ubdate Firmware

*Bios Mode*

wait updating F/W

2010/10/28 Vo.01

Canon ImageRUNNER 2422 2420"

这个答案有帮助吗?

得分 6
添加一条评论

this is all problem solution

这个答案有帮助吗?

得分 3

1条评论:

*Bios Mode*

wait updating F/W

2010/10/28 Vo.01

Canon ImageRUNNER 2422 2420"

完成的

添加一条评论

trouble massage like Ubdate Firmware *Bios Mode*

这个答案有帮助吗?

得分 3
添加一条评论

hello i have machine canon ir 2420 , error message update firmware , i am change board usb , fix problem

Block Image

Block Image

这个答案有帮助吗?

得分 2

1条评论:

That will work for sure! BUT will cost you a fortune! And yeah - that is much easier!

完成的

添加一条评论

https://www.canon.fr/for_work/mobile-sca...

这个答案有帮助吗?

得分 1
添加一条评论

Block Image

Here is what you can do. That helped me once.

You need to get to mainboard and find there flash memory. In my case it was chip - 25Q64BVFIG. It contains firmware for that machine.

Then - need to desolder it, reprogram using programmer with support of that type of schemes and solder it to mainboard again.

Downbelow will be a link for dump to download (must mind you - that Canon iR-2420 was in Russia and I'm not sure about differences between US/Canada and European firmwares. Just to let you know that beforehand - that there might be some problems to show up. But I suppose - since machine will finish loading inner software and comes to ready state - you can just figure it out by playing with local/country settings). These are photos before and after (connector melts a little)

Block Image

Block Image

- About dump - it's ready to use with your programmer - it's been taken from newly installed machine (not by me - but from guys from similar Russian tech forum). DUMP for reflash memory chip

- About programmer - mine is - TL866A - pretty simple and cheap

Block Image

Good luck! Hope that will works for you!

这个答案有帮助吗?

得分 1

1条评论:

Here is link to forum Copytechnet - where I originally posted this recommendation

http://www.copytechnet.com/forums/canon/...

完成的

添加一条评论

yep! what if i swap the chip with the one from 2318 ? will it work?

这个答案有帮助吗?

得分 1

1条评论:

Not 100% sure, but suppose yeah, that might work for you.

完成的

添加一条评论

ما حال مشكلة هدا راسالة الة سحب

canon 2420

Message please wait

这个答案有帮助吗?

得分 1
添加一条评论

this is also my problem pleas give me solution

这个答案有帮助吗?

得分 0
添加一条评论

what would be the problem of this and what should i do ?

这个答案有帮助吗?

得分 0

1条评论:

what would the problem of this and what should i do

完成的

添加一条评论

Boa tarde a equipe da CANON, eu tenho uma maquina fotocopiadora canon 2420, ela tinha problema de fonte e ja foi resolvido, so que nao esta a fazer copia, aparece na tela a seguinte mensagem: Update Firmware * Bios Mode* 2010/10/28 VO.10W STARDR 5N

这个答案有帮助吗?

得分 0

1条评论:

Como solucionar esse problema?

完成的

添加一条评论

Please if any body knows the solution on how to fix this problem of (* bios mode * firm ware update ) on IR2420 Canon .

Please E mail me on vifeanacho@gmail.com

这个答案有帮助吗?

得分 0
添加一条评论

i need ir 2420 firmware

help me

这个答案有帮助吗?

得分 0
添加一条评论

https://cloud.mail.ru/public/E3FN/g9Ry4q...

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

wendosen 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 14

过去 30 天: 54

总计 8,819