声誉积分: 973
4
2
1
Hi. I was just trying to reball an ic but when trying to remove it from the board I noticed this black adhesive/cement stuff around it?
Is there a way to remove this?
I have tried the heat gun at max temperature but this did not soften it?
This is my first board repair and am using a dead board to practice on so not worried about the board.
Thank you
Update.
I used a bit of force and the ic came off but also took a pad with it.
声誉积分: 782.1千
1.1千
893
2.3千
trevor, sounds like an epoxy underfill. That is to stabilize the IC on a logic board. Add an image of the IC, its location and the damage so we can see what you see. Take a look at this video and see if it explains it.
这个答案有帮助吗？
the video is right. Have been checking online and heat with gentle scraping is the only way to remove it.
Tried taking a photo of the damage but it doesn't come out well in the pics.
It's just one pad under the baseband chip. All the others are intact.
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 2,551
