声誉积分: 25
2
Hello all,
I have an issue with my Kenmore Elite top load washer. Once it is about to transition from the spin cycle to a different cycle the drum will not stop spinning but the agitator does stop. The drum will continue to spin along with a really loud sound. You can view a YouTube video of the issue here:
(at 56 seconds the issue occurs, the rest is for context).
Can anyone help me with what the problem is?
Thank you very much!
-Sean
声誉积分: 25
2
After the unplug and plug in didn't work, I went to work on under the machine. Immediately I noticed that the main bolt that holds the stader assembly on the machine had backed out. After tightening this down as best I could the machine is working properly again.
这个答案有帮助吗？
声誉积分: 685.3千
3.4千
1.1千
2.6千
First reset the machine by unplugging for 5 minutes. If the problem persists, replace the timer.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 416
