My unit wont turn on

Question

Brother PT-D200

A handheld, user-friendly electronic label maker manufactured by Brother.

2 个问题查看全部

noosheen @noosheen2994

声誉积分: 13

1

发帖于: 2015年4月23日

更多选项

My unit wont turn on

I already replaced the ac adapter with a new one and the machine still won't turn on. I don't use the unit with batteries at all as it drains the batteries very quickly.

the screen remains blank. any suggestions?

so i tested it out today with batteries and the unit turned on! Which makes me think something is wrong with the metal prong that attaches to the adapter. I also tested my adapter with my dvd player and it worked. So now I know what the problem is but can this be fixed? It looks fine to me; is not loose or broken.

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

2条评论

i have the PT-D600 that wont turn on, or do anything at all..

由 brookemaloney15 完成的 2019年3月18日

Brother pulled an Apple on me and reversed the polarity on their 9v adapter. I made an adapter adapter (I call it an unadapter) so the center pin is the negative and now my generic 9v ac adapter works.

Pay attention to the (+)-c-(-) symbol beside the voltage requirement.

由 Joe Bloggins 完成的 2023年9月25日

添加一条评论

4个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 781.6千

1.1千

893

2.3千

发帖于: 2015年4月23日

更多选项

noosheen, start by opening it up using these guides. Then use a multimeter and plug your power adapter in. Measure the voltage on the solder points of the jack on the logic board. It is possible that it has broken off, that you have colder solder joints or that the jack itself has failed.

这个答案有帮助吗？

是否

得分 2

添加一条评论

i have the PT-D600 that wont turn on, or do anything at all.. — brookemaloney15
Brother pulled an Apple on me and reversed the polarity on their 9v adapter. I made an adapter adapter (I call it an unadapter) so the center pin is the negative and now my generic 9v ac adapter works.

Pay attention to the (+)-c-(-) symbol beside the voltage requirement. — Joe Bloggins

dmsmakemusic43 @dmsmakemusic43 声誉积分: 151 1 1 1 · Answer 1 · 2015-04-23T11:05:56-07:00

dmsmakemusic43 @dmsmakemusic43

声誉积分: 151

1

发帖于: 2015年4月23日

更多选项

REFER TO THESE it seems

SOMEONE MAY HAVE DROPPED IT. SOMETHING SEEMS BROKEN.

Brother PT-D200 Troubleshooting

这个答案有帮助吗？

是否

得分 1

添加一条评论

Ben Q @benq84168 声誉积分: 13 1 · Answer 2 · 2022-06-23T01:46:39-07:00

Ben Q @benq84168

声誉积分: 13

1

发帖于: 2022年6月23日

更多选项

Remember the power adapter must be center pin negative, most adapters are center pin positive, look closely where the adapter plugs in.....there is a small symbol that shows center pin negative

这个答案有帮助吗？

是否

得分 1

添加一条评论

Cynthia Rincon @cynthiarincon 声誉积分: 1 · Answer 3 · 2019-05-02T15:58:33-07:00

Cynthia Rincon @cynthiarincon

声誉积分: 1

发帖于: 2019年5月2日

更多选项

I have bought 2 adapters and both do not turn on the machine. I have also put in 6 brand new batteries and still won't turn on.

这个答案有帮助吗？

是否

得分 0

2条评论:

I just had this problem too. It worked great last time I used it. Plugged it in this morning and it won't turn on with the adapter. I put in batteries, still won't turn on. Any solution?

由 Diane Ridpath 完成的 2021年3月27日

Same problem for me too.

由 JaneC71 完成的 2023年9月7日

添加一条评论

Brother PT-D200

My unit wont turn on

Update

4个答案

添加你的答案