跳转到主内容

The camera has a 2.7” LCD screen, a 12 megapixel Four Thirds sized sensor, and a built - in flash. Dimmensions are 115 x 72 x 42mm.

16 个问题 查看全部

My screen is displaying "Write Protect Error". What does this mean?

My screen is displaying "Write Protect Error". I do not know how to fix this. Please help.

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1
添加一条评论

4个答案

最有帮助的答案

So. If anybody care. Pin of sd-card slot that responsible for write protection just takes off from PCB with contact pad. And there is no any wire to connect to pin. Transitional hole right under contact pad. So, to repair it you need unsolder sd-card slot completely, extract wire from transitional hole and connect it to ground to switch off write protection for ever. Then solder slot back.

这个答案有帮助吗?

得分 1
添加一条评论

Hi Matthew,

It sounds like you are having issues with your SD Card. You can start your troubleshooting by making sure the "Write protect switch" on the side of your SD Card. If it is in the unprotected position then you should check out the "Write protection error" section of the Troubleshoot page. I hope this helps and good luck!

~Jeff

这个答案有帮助吗?

得分 0
添加一条评论

This is how my E-PL1 died. No matter what I did with the SD cards (yes, plural) I couldn't write to them.

这个答案有帮助吗?

得分 0
添加一条评论

Write protection swith on sd-card is mechanical. Its state is read by swith in sd-card slot. So there is nothing to do with sd-card. I have same problem and some time i has had workaround inserting card proper way, but not today. So, i will disassemble camera and disable this switch totally.

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Matthew 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 10

过去 30 天: 43

总计 2,140