Can you replace the battery without soldering?

Question

初代iPhone

初代iPhone（又称iPhone 2G）。型号为 A1203，存储容量有4GB、8GB、16GB可选，机身颜色仅有黑色搭配金属铝。维修初代iPhone是容易的，需要耐心，一些工具和焊接技术。

224 个问题查看全部

madmaxmedia @madmaxmedia

声誉积分: 159

5

2

发帖于: 2009年12月11日

更多选项

Can you replace the battery without soldering?

Is there room in the iPhone to simply cut the old wires, strip the end, and then attach the leads to the replacement battery wires? (of course using some heat shrink tubing to insulate the connections.) It shouldn't take up that much extra space, if you judge the lengths correctly. Judging by the photos here, I think there should be enough room.

I read so much about the difficulties of desoldering and soldering on the iPhone board, thought this might be a safer route. Of course, you still need to be careful not to cause a short, etc.

回答此问题我也有这个问题

这是一个好问题吗？

是否

得分 -1

添加一条评论

3个答案

madmaxmedia @madmaxmedia 声誉积分: 159 5 2 · Answer 1 · 2009-12-17T20:31:28-07:00

最有帮助的答案

madmaxmedia @madmaxmedia

声誉积分: 159

5

2

发帖于: 2009年12月17日

更多选项

LOL, thanks Louis. I have soldered little connections before, but had read about how difficult this one was- I guess that's all relative. I've done enough iFixit repairs to know I can handle most difficult jobs, but also that I'm better off to take the easiest way possible... ;-)

这个答案有帮助吗？

是否

得分 1

添加一条评论

Ben Eisenman @beneisenman 声誉积分: 87.6千 161 82 213 · Answer 2 · 2009-12-11T17:16:25-07:00

Ben Eisenman @beneisenman

声誉积分: 87.6千

161

82

213

发帖于: 2009年12月11日

更多选项

I'm not an expert on soldering, but it seems to me that doing it that way, while it may be easier, creates 3 possible failure points instead of 2 (battery side, logic board side, and then adding a middle solder). With something that gets bumped around that much, it seems scary to me.

Having that said, I believe there may be enough clearance.. steps 18-21 of the guide show sufficient wire length.

这个答案有帮助吗？

是否

得分 0

添加一条评论