跳转到主内容

The Nerf Maverick is one of the most popular guns in the company's lineup and is beloved for its simplicity and ease of use.

9 个问题 查看全部

Why won't my gun fire?

The gun seems to be cocking correctly, but when I pull the trigger nothing happens.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 6
添加一条评论

2个答案

已选择的解决方案

Plunger Misalignment

The plunger propels the bullets by air pressure. Often times after disassembly, the plunger can become misaligned with the holes in the barrel. Simply re-positioning the plunger so that its air flows directly into the barrel will solve the problem.

Bad Seal in Plunger

The plunger is made up of two tubes, one inside of the other. The outer tube is pulled back when the gun is cocked and forces air out the inner tube when the trigger is pulled. There is an rubber o-ring seal between the two tubes which forces the air to flow in the correct direction. If this seal fails, the air will not reach the bullet with enough pressure to fire. If this happens, the o-ring must be replaced. Home centers should have the appropriate size in the plumbing section, or a rubber band may be used as a substitute.

See the O-Ring Replacement Guide for more details.

这个答案有帮助吗?

得分 0

1条评论:

My nerf Infinus’s trigger is jammed and it won’t shoot how do I fix it

完成的

添加一条评论

It is difficult to give a correct answer without diagnostics, there can be many different reasons, but most likely it is a matter in the starter unit. I'll leave it here https://blasterhero.com/nerf-gun/how-to-... hope it helps you.

这个答案有帮助吗?

得分 0

1条评论:

piece of garbage fired 1 time

完成的

添加一条评论

添加你的答案

Michael Walker 将永远感激不已
浏览统计数据:

过去 24 小时: 2

过去 7 天: 18

过去 30 天: 51

总计 12,753