Error 4sns/1/40000001:VPOR-0.003. Water Damage, acting up?

Question

2010年中 MacBook Pro 13" 一体化机

794 个问题查看全部

Carlos Solano @carlossolano

声誉积分: 21

Carlos Solano INC

1

发帖于: 2014年11月27日

更多选项

Error 4sns/1/40000001:VPOR-0.003. Water Damage, acting up?

I had water damage a few day ago, it was completly dead, the water got by the BIOS Chip, I clean it with alcohol and turns on now. Since that happened, the computer is doing werd things.

-When i connected to the MegSafe it turns on by itself (with battery connected and lid close only).

-When I run APPLE HARDWARE Diagnostic I get the error 4sns/1/40000001:VPOR-0.003

-When is off with battery connected and I touch by the mousepad it wil tunr on by itself.

Thank you in advance

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

2条评论

Change your battery for a known good one and re-evlauate based on "(with battery connected and lid close only)."

由 oldturkey03 完成的 2014年11月28日

Friend, I am with this same problem. You managed to solve?

由 Alan Jhone 完成的 2015年7月15日

添加一条评论

2个答案

已选择的解决方案

originalmachead @originalmachead

声誉积分: 116.3千

66

68

359

发帖于: 2014年11月27日

更多选项

Some sort of Voltage problem power bus ''(from your description you should have already surmised this)'' . Sorry I can't be more specific.

4sns is at the beginning of every sensor error the data at the end of the error code points to what hardware that is out of spec, and, numbers usually represent how far out of spec the hardware is.

Did you run the diagnostic with the magsafe connected or on battery only? Some power errors come up if the unit is not plugged into the mains during the test (or if in your case the main power supply is unstable).

If this answer is acceptable please remember to return and mark it accepted.

这个答案有帮助吗？

是否

得分 1

2条评论:

It was connected to the Megsafe but the battery was disconnected from the board. Now, all those issues that I have only happen if the battery is connected. Could the battery be damage and causing these issues even when the water didn't reach it? Thank you

由 Carlos Solano 完成的 2014年11月28日

Yes it is possible

由 originalmachead 完成的 2014年12月2日

添加一条评论

Change your battery for a known good one and re-evlauate based on "(with battery connected and lid close only)." — oldturkey03
It was connected to the Megsafe but the battery was disconnected from the board. Now, all those issues that I have only happen if the battery is connected. Could the battery be damage and causing these issues even when the water didn't reach it? Thank you — Carlos Solano

jsandusky @jsandusky 声誉积分: 1 · Answer 1 · 2019-07-23T16:25:31-07:00

jsandusky @jsandusky

声誉积分: 1

发帖于: 2019年7月23日

更多选项

I have a similar problem but ca not find:

apple error 4sns/1/4000000:vpor-12.764

这个答案有帮助吗？

是否

得分 0

添加一条评论

2010年中 MacBook Pro 13" 一体化机

Error 4sns/1/40000001:VPOR-0.003. Water Damage, acting up?

2个答案

添加你的答案