跳转到主内容

A compilation of guides for counter-top and handheld blender repair.

343 个问题 查看全部

Trying to disconnect the drive gear from a bullet blender?

I tried to uninstall the drive gear on the bullet blender. The screw in the base won't hold a screwdriver and the gear is too tight to get it off as the driver slips in the slot. Would like to know if anyone has a better technique to take it off for replacement.

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 -1
添加一条评论

1个答案

已选择的解决方案

Nick Steffen, I hear you. That was a bear to take it. You can disassemble the blender leaving the gear on. Then place the stator in a vise at the end where the slot for the screwdriver is. Use a pair of good channel lock or vise grips to take the gear of. It is easily possible that you will destroy the gear. Make sure you have replacements.

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

Nick Steffen 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 63