跳转到主内容

Apple发布于2012年9月12日的第六代iPhone,维修时与前代型号一样,需要螺丝刀和撬棒。iPhone 5以多种版本销售:通讯制式有GSM/CDMA;存储容量有16/32/64G;颜色有黑/白。

2521 个问题 查看全部

Sleep button not working. Replaced it, still nothing, whats wrong?

I have an iPhone 5 that the sleep/wake power button wasn't working. I read online and did some research and it seems it is either one of two things or both. The button itself could be damaged or the power button/volume/mute flex cable could be damaged. I replaced the sleep/wake power button with no success. Would it just be best practices to replace the flex cable and the button to make sure you get whatever is malfunctioning? Or is there usually one definitive solution one way or the other that you can troubleshoot and pinpoint?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

4个答案

已选择的解决方案

Hi,

Replacing the button would do absolutely nothing. You need to replace the entire flex cable as it is this that controls the actual sleep/wake function, the physical button is there to press the contact on the flex cable itself. :-)

这个答案有帮助吗?

得分 1
添加一条评论

the button that fails is part of the flex.

you can save yourself trouble by just overlaying the new flex and plugging it into the board without installing it. connect battery and see if manually pushing the little actuator on the flex will start the phone. If not, you have a board problem and not a flex/button problem.

in the iPhone 5 there is a common problem of pry damage at battery replacement on the edge of the board near the SIM tray. This can dislodge components that control the lines of the home and power button. I've never seen this present as just a power button failure, but it is possible. it is also possible to damage the power flex connector on the board.

all of these are repairable, but first you need to differentiate a flex problem from a board problem.

jessa

这个答案有帮助吗?

得分 0
添加一条评论

Seem to me you just replaced the metal button which in 99.9999% of the cases it will not fix its always the power flex that needs replacing

这个答案有帮助吗?

得分 0
添加一条评论

So here is what I did. The metal back on the home button I put on upside down. So this would be a fare warning to ensuring that the metal back to the home button is installed the right way. Thanks for all your comments!

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

Christopher Christensen 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 141