iPhone4S是第五代iPhone。网络制式为GSM/CDMA ,存储容量有8GB、16GB、32GB、64GB可选,机身颜色有黑色、白色可选。维修iPhone4S是容易的,需要耐心,用到的工具有螺丝刀、撬棒等。

2971 个问题 查看全部

Logic Board component fell off during screen repair

Block Image

During a screen repair I had a very small component fall off right below the rightmost screw of the dock connector. It is square and appears to have 4 solder pads on it. I'm not 100% sure this is actually the correct component as I just ended up with the tiny part on my sheet after I was all done so I had to go back in and look on the logic board for missing parts.

I was wondering A) what this is as I can't even read the part number it's so small, B) is it important, and C) how can I possibly reconnect it? Thanks for your help!

已回答! View the answer 我也有这个问题

这是一个好问题吗?

按维修分数 1
添加一条评论
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12
传播 Fixmas 欢乐
Get $12 off your purchase of $50 or more with code FIXMAS12

1个答案

已选择的解决方案

mindseye11, that is reference designator U18_RF which is a 74AUP1G08GF INPUT AND GATE in a SOT891 package. It is available right here. Here is the datasheet. It is part of the Baseband circuitry. For a repair, it will need to be soldered back on. Hope this helps, good luck

这个答案有帮助吗?

按维修分数 2

评论:

Thanks oldturkey, would this affect the cellular signal? So far that's the only thing I've found not working since I turned it on.

Do you have any tips on soldering something so small? Also, since the pads are on the back, how do I even get solder on there and stick it to the board at the same time? I've never solder something that didn't have legs on its sides.

It's done via reflow method, can't use a soldering iron for that one. Yes it could affect the cell signal.

Would that be done with a heat gun? Just use tweezers to hold the component in place and let the heat gun melt the existing solder back onto the board?

that is in principle correct. Just don't burn the part, you will have to have good temp control and it will only take seconds.

I'm looking a little closer at the component and it appears to only have 4 pads, while the logic board shows 6 pads. Is that right? The link you sent shows a component with 6 pads. Could the pads have come off? Is that salvageable?

显示更多的1条评论

添加一条评论

添加你的答案

mindseye11 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 109