So I'm currently trying to revive a pretty messed up IPhone 4s for att. I finally got all the parts to realize I accidentlly ordered a CDMA screen I tried installing it anyway to see what would happen. I turned it on but all it does is light the screen up a little and keeps making the charging tone, is it because of the wrong screen or are there more underlying problems?
声誉积分: 43.8千
64
44
41
It's said that the screen is compatible. So there maybe something else wrong with the screen such as lack of power, poor quality of screen, software problem or improper installation and so on.
这个答案有帮助吗？
声誉积分: 1千
8
7
1
All 4S models use the same replacement screen. In other words, there is no such thing as a "CDMA iPhone 4S Screen" or a "GSM iPhone 4S Screen".
To be completely clear, the iPhone 4 and 4S actually use the exact same replacement screen assembly. The only difference is in the plastic frame/bezel that the replacement screen is installed into. The GSM iPhone 4 uses one frame, the CDMA iPhone 4 a different one, and then all models of the iPhone 4S use yet another different frame.
So the moral of the story is that it's not a compatibility question. Perhaps the connector for the LCD on either the replacement screen or the logic board was damaged during installation. Or, since you said the phone was "pretty messed up", perhaps the logic board was already damaged when you got the phone.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 0
总计 103
