跳转到主内容

修复你的物品

维修的权力

商店

7.9 inch display iPad Mini, with 16, 32, or 64 GB of storage.

775 个问题 查看全部

potential problems by soldering the ic chip incorrectly?

Hi

is there any potential pronlems if I solder my own ic chip to a new digitiser? Would it blow anything if a couple of contacts were touching? Or would it simply not work?

Would like to practice this, but not at the expense of someones ipad when i repair it.

would be handy to do, as im fed up of these cheap ones which flicker everytime I lay it flat, and have to cover it in tape.

Thanks

回答此问题 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个回答

最有帮助的答案

Most likely worst case scenario: dead device.

Update

If you don't do it right, you could get the power leads or voltage to where they don't belong. Hence possibility of a dead device is strong.

这个答案有帮助吗?

得分 2

评论:

Is that fact or just a guess? Just that I would think as the connections would only ne sending signals, then I would imagine the digitiser would go a bit loopy as if the flex cable was pinched? But that's just a guess. Wonder if anyone has actually done it wrong? I know all the local repair shops in this area don't solder the parts.

完成的

If you don't do it right, you could get the power leads or voltage to where they don't belong. Hence possibility of a dead device is strong.

完成的

Ok, I'm not really experienced at soldering, but practice makes perfect.

wonder if there's some sort of schematic for that connection?

完成的

添加一条评论

添加你的答案

Duane 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 99